1 minute read

INSTRUMENTS AND CONTROLS

Next Article
METRIC CONVERSIONS

METRIC CONVERSIONS

• Automatic T raction Control Switch/Heavy Mud/Snow – Activate for increased traction control heavy mud snow (See T raction Control TC) (If , page 160 the OPERA TION section this manual for more When the operator presses the top the rocker the heavy mud/snow function A indicator lamp blinks continuously The A lamp stops blinking when the A mode switch pressed again ignition key

Caution

sur e deactivate the heavy mud/snow function when longer needed. Continued operation with the heavy mud/snow function active will r esult vehicle damage. after a r easonable amount time (no mor e than five minutes) the vehicle still not moving, deactivate the A and put chains.

• Body W arning Lamp – The Body Lamp illuminates a RED warning icon the "D" panel alert the driver a body function defined the bodybuilder . example, the body warning lamp will illuminate alert the driver that the dump body not fully down.

• Daytime Running Lights (DRL) Override Switch – Daytime Running Lights (DRL) come standard all MACK vehicles and can optioned w i t h w i t h o u t override switch. When the DRL override switch has been specified, dif ferent conditions can selected that cause the DRL automatically activate, DRL can automatically turned when the parking brake released, the engine running both. Only one these choices may selected. Using DRL will illuminate the low beam headlamp bulbs a slightly reduced intensity . The DRL function will monitor high beams well. the high beams are activated, the DRL will temporarily turned f until high beam use ceases.

This article is from: