WHEELS MAINTENANCE AND LUBRICA TION

Wheel Inspection

Look the wheels and cap Inspect them for evidence cap nut Rust streaks from the cap nut ball seat are indication Refer the Maintenance and Lubrication Manual (TS494) for complete procedures concerning wheel inspection and wheel nut

Look for cracks around the hand stud hole and Look for broken wheel damage improperly seated lock

Danger

T ires used multipiece rims must assembled and inflated only experienced, qualified personnel. T ires must inflated a safety cage whenever possible. If, however , a safety cage not available, use a portable lock - ring guard. The tire must deflated prior removal the tire - and - rim assembly from the vehicle. Remove the valve core ensure complete deflation.

Danger

NEVER position your body front the rim during inflation.

Caution

NEVER use water - based punctur e liquid balance materials containing water All - Steel Radial Ply truck tir

Inflation Pressure

T o ensure maximum mileage and overall performance from your essential that they operate the correct inflation pressure for the load Inflation pressure should checked daily while the tires are Always use accurate tire pressure NEVER bleed air from a hot will then Refer the specific tire manufacturer ’ s data the vehicle certification label for a complete listing tire inflation For additional information concerning tire refer the Maintenance and Lubrication Manual (TS494)

W Arning

UNDER CIRCUMST ANCES should you drive underinflated overloaded tir es. A tir e this condition builds excessive heat which can r esult sudden tir e destruction, operty damage and personal injury .

https://www.truck-manuals.net/