1 minute read

INSTRUMENTS AND CONTROLS

Next Article
METRIC CONVERSIONS

METRIC CONVERSIONS

Note: When ABS malfunction detected, anti - lock braking the fected wheel(s) will disabled and normal braking will return; the other wheels will retain anti - lock braking. Operate the vehicle normally and have the ABS system serviced correct the

23. Power T ake - Off Operating Indicator (Green) – Indicates O

24. Cruise Control Indicator (Green) – Indicates that cruise control engaged.

25. Right T urn Signal Indicator (Green) – Flashes green when turn signal

26. Bendix Adaptive Cruise Control (ACC) Indicator (Red) –Illuminates when the Bendix ACC engages.

27. Reverse Indicator (Amber) – Indicates that the transmission Reverse.

28. Automatic T raction Control TC) Indicator (Amber) – Indicates that A operating and will flash when deep mud and snow

29. Neutral Indicator (Amber) – Indicates that the transmission Neutral.

30. Fasten Seat Belt W arning Indicator (If Equipped) (Red)

31.HEST Indicator (Amber) (If Equipped) – The High Exhaust T emperature (HEST) indicator displayed when the exhaust temperature reaches 300°C (572°F) and the regeneration process begins. When the regeneration process completed, the engine should allowed run until the HEST indicator shuts

During automatic regeneration while the vehicle moving, the HEST indicator will only illuminate during regeneration when vehicle speed less than 8 kph mph).

During a parked the HEST indicator will turn f when regeneration complete and the exhaust temperature has returned a normal

HEST Indicator

32. Fuel Gauge – Registers the fuel level the supply

This article is from: