216 OPERA TION

T o continue while fifth gear - flip the range selector down range and you move the gearshift lever through NEUTRAL fourth gear , move the splitter switch from the shift lever moves through the range shift will Y are now fourth gear - split (LO Continue using the shift lever and splitter the normal manner , until you reach speed gear (LO -

T o downshift from - split - split (in the same gear) engine speed falls, move the splitter (preselect), then release and reapply the accelerator pedal. audible shift completion should heard.

T o downshift from a - split gear the next lower gear ’ s - split (in the same range) engine speed falls, move the splitter switch you move the shift lever through NEUTRAL the next lower gear . Note that the splitter switch must not actuated the position until the main box

NEUTRAL. Remember double - clutch between gears using the accelerator pedal synchronize the transmission components.

T318 and T318L Reverse — Reverse can used range only

T318LR Reverse — Reverse can used and range. T r s e , bring the truck a complete Flip the range selector the range desired Move the shift lever out reverse through and then back into reverse the lever moves through the range shift will

Caution

T o avoid transmission damage, NOT change range while moving REVERSE.

https://www.truck-manuals.net/

Rear Case, Side - Mounted O Operating Procedures (T318, T318L and T318LR)

When engaging the O —

Select - split using the splitter switch and select range using the range selector .

Note: The transmission MUST range and - split all times during O operation.

Depress the clutch pedal disengage the clutch.

Set the parking

Move the main box shift lever the NEUTRAL position.

Move the dash - mounted compound NEUTRAL control valve the position, which moves the synchro clutch a NEUTRAL position.

Engage the

Move the main box shift lever the desired ratio.

Release the clutch pedal engage the clutch.

Operate the O - driven load.

When disengaging the O

Depress the clutch pedal disengage the clutch.

Move the main box shift lever NEUTRAL.

Disengage the

Move the dash - mounted compound NEUTRAL control valve the OFF position, which moves the synchro clutch back range.

Move the shift lever the desired main gear box

Release the parking brakes.

Release the clutch pedal engage the https://www.truck-manuals.net/