A Intended usage
The Dynapac „Guideline for the intended and correct usage of cold planers“ falls within the scope of supply of this machine. It forms part of these Operating Instructions and must be observed. National regulations apply without restriction. The machine described in these Operating Instructions is a cold planer which can be used as follows in enclosed building sites on roads: - to partially or completely remove asphalt, asphalt based and cement layers - to remove distortions in the form of track grooves, lateral bulges, lateral warps, - to recreate a proper surface, - to implement roughing up and stripping work. For this, the underlying base layer must be robust enough to withstand movement of the cold planer. The transportation of outsiders is expressly forbidden, as is using the cold planer as a traction mechanism, winch or lifting device. The intended usage also includes compliance with the operating, transport, maintenance and repair conditions specified in the Operating Instructions. The machine is not designed for any type of usage not described in the intended usage section. The manufacturer is not liable for such instances of use.The operator alone bears all risks for such usage. When in doubt, contact the manufacturer.
A_PL2000S_2000LS_GB.fm. 1-2 04-01.07
Obligations of the operator: An operator, as defined in these Operating Instructions, is any natural or judicial person who uses the cold planer himself or on whose behalf it is used. In special circumstances (e.g. leasing, rental), the operator is that person who is to observe the specified operating obligations in accordance with the contractual agreements made between the owner and user of the cold planer. The operator must ensure that the cold planer is only used for its intended purpose and that all kinds of risk to the life, limb and health of users or third parties are prevented. Compliance must also be maintained with the accident prevention regulations, all technical safety rules as well as the operating, maintenance and repair guidelines. The operator must ensure that all users have read and understood these Operating Instructions.
A1
