5Levelling equipment

5.1MOBA-matic type

The MOBA-matic is a control and feedback control system for construction machinery and has been especially designed for use in cold planers.

The Moba-matic is available with a large number of sensor combinations.

-(1):cable sensor (distance sensor)

-(2):Digi-Sonic sensor (distance sensor)

-(3):Sonic-Ski (distance sensor)

-(4):Digi-Rotary sensor (distance sensor)

-(5):laser receiver (distance sensor)

-(6):Digi-Slope sensor (slope sensor)

As standard, the machine is fitted with two digital controllers and two cable sensors or ultrasonic sensors (Digi-Sonic) which act on the side boards. The use of a transverse slope sensor (Digi-Slope) and the other sensor types is optional.

The digital controller automatically detects the sensor connected during setting and briefly indicates this through the sensor detection. Robe.jpg/Sonic2.jpg/Sonic.jpg/Rotary.jpg/Laser.jpg/slope.jpg

ItemDesignationBrief description

1 Liquid crystal display Display can be easily read, even when the light is poor, thanks to the integrated lighting.

Three operating modes are available:

-Lamp off: Stand by position - direct adjustment of milling depth and slope possible in manual mode. The display indicates the nominal value selected.

-Lamp on: Machine operating in automatic mode (automatic mode has been activated on the main operating panel). The display indicates the nominal value selected.

-Lamp flashes: Machine operating in semi-automatic mode (stand by position or presettings for milling depth / slope possible). The display indicates the actual value of the milling depth adopted.

The direction lamp is a special function for wire cable sensing with Sonic-Ski ( ). When using ground sensing, the lamp is of no significance.

Three operating modes are available:

-Lamp off: sensing cable running centrally.

-Lamp on: sensing cable running slightly offset.

-Lamp flashes: sensing cable running outside the measurement area, correction required

If the lamp flashes, bring Sonic-Ski back into central position. If the second direction lamp flashes at the same time, an alarm has been activated.

If the alarm is activated, an immediate correction is required! If necessary, interrupt the milling process!

The direction lamp is a special function for wire cable sensing with Sonic-Ski ( ). When using ground sensing, the lamp is of no significance.

Three operating modes are available:

-Lamp off: sensing cable running centrally.

-Lamp on: sensing cable running slightly offset.

-Lamp flashes: sensing cable running outside the measurement area, correction required

If the lamp flashes, bring Sonic-Ski back into central position. If the second direction lamp flashes at the same time, an alarm has been activated.

If the alarm is activated, an immediate correction is required! If necessary, interrupt the milling process!

ItemDesignationBrief description

The cable lamp is a special function with Sonic-Ski ( ).

Two operating modes are available:

5Cable lamp

-Lamp on: cable mode active. The cable mode has been activated from manual mode by simultaneously pressing the UP and DOWN buttons. -Lamp off: ground mode active (create mean value).

During ground sensing, the Sonic-Ski is fitted in a longitudinal direction, during cable sensing, the Sonic-Ski is fitted in a transverse direction.

To increase the nominal value. Machine response in automatic or manual mode (change to actual value).

6UP button

Machine does not respond in semi-automatic mode (only for preselections, i.e. nominal value specifications.)

To decrease the nominal value. Machine response in automatic or manual mode (change to actual value).

7DOWN button

Machine does not respond in semi-automatic mode (only for preselections, i.e. nominal value specifications.)

8 Automatic/manual button

To changeover between automatic and manual mode (hand-controlled operation)

9Input button

When this button is pressed, calibration to zero is conducted and/or the nominal value is set to match the actual value

10LED display

Enlarged and detailed depiction of functions of the arrow symbols on the LC display. The LED is particularly useful when the operator is at a great distance from the controller and if the sun is strong.

11Connection cable

For connection with the connection box. (Connection to vehicle circuit voltage)