SPARE PARTS

Your authorised Dynapac dealer:

Foreword

If the machines are to be operated safely, the information provided in these Operating Instructions will be required. The information is shown in a brief and clear form. The Chapters are ordered by letter. Each Chapter starts on page 1. The pages are designated with a letter for each chapter and a page number.

Example: Page B 2 is the second page of Chapter B.

In order to prevent misunderstanding when making inquiries, during consultations, when placing orders etc., please always use the terms specified in the Operating Instructions.

These Operating Instructions document various options. During operation and when undertaking maintenance work, ensure that the description appropriate for the option in question is used.

The machine may only be operated by trained staff.

These Operating Instructions should be read and applied by everyone who has been assigned tasks involving the operation, recondition (maintenance, repairs, inspection) or transport of the machine.

These Operating Instructions contain important specifications and information on how to safely, economically, professionally and correctly use the machine. Compliance with these instructions will help to prevent dangerous situations, reduce downtimes and repair costs, to increase reliability during usage and the service life and to ensure compliance with the warranty terms.

Safety information and important explanations are identified by the following pictograms:

Stands for safety information which must be observed in order to prevent dangers affecting operators.

Stands for information which must be observed in order to prevent material damage. Stands for information and explanations.

Identifies standard equipment.

Identifies optional equipment.

The Operating Instructions must always be available at the machine’s operating site. They are valid in conjunction with the Dynapac safety manual, the information on intended usage and the supplementary operator’s instructions required on the basis of existing national or regional specifications regarding technical regulations, accident prevention and environmental protection.

In the interest of further technical development, the manufacturer reserves the right to undertake modifications while retaining the key features of the machine type described and to do so without correcting these Operating Instructions.

Dynapac GmbH Wardenburg

Ammerländer Strasse 93

D-26203 Wardenburg / Germany

Tel.:+49 / (0)4407 / 972-0

Fax: +49 / (0)4407 / 972-228 www.dynapac.com