ItemDesignationBrief description

1Starter

Press to restart the engine. To prevent the batteries from discharging, do not press start button for more than 15 seconds

The ignition on the main control panel must be switched on. (Ignition key in position 1)

Press in an emergency (people in danger, threat of collision etc.)!

2 EMERGENCY STOP button

-When the EMERGENCY STOP key is pressed, the engine, traction units and steering are all switched off (i.e. disabled). It will then be impossible to perform a procedure, such as one on the loading conveyor! Risk of accident!

-To restart the engine, all EMERGENCY STOP buttons must be in the upright position.

3 Preselection controller Travel drive

4 Switch Direction of travel

This is used to set the speed which is to be attained when activating the direction of travel switch.

-Top shift position: forwards direction of travel

-Bottom shift position: reverse direction of travel

-Left shift position: front drive unit pair is steered to the left

5 Front drive unit pair steering movement

-Right shift position: front drive unit pair is steered to the right

Ensure that there is no-one in the machine’s danger area!

-Left shift position: rear drive unit pair is steered to the left

6 Rear drive unit pair steering movement

-Right shift position: rear drive unit pair is steered to the right

Ensure that there is no-one in the machine’s danger area!

7Connection cable

The connection cable with the four-pin connector is plugged into the socket provided for this purpose in the engine compartment behind the engine compartment flap.