4
Normal on-road travel The machine is not intended for normal on-road travel and is not equipped for such circumstances. It should be used within enclosed building sites. If the machine’s loading or unloading area is outside an enclosed building site or if the machine has to propel itself from one section of the roadworks to another, the machine must be dual-manned for safety reasons. All safety measures (cordoning off) required for this should be implemented. If a machine has to be parked on a public highway, it should be cordoned off in accordance with the relevant regulations and secured to prevent the machine from rolling away, tilting or swivelling. If machine components protrude into another lane of traffic during milling or manoeuvring, this should be briefly cordoned off until the hazard has passed. The rotary beacons and hazard flasher are permanently activated during milling and transport, the warning signs on the machine are permanently folded down. If necessary, the machine should always be used on the nearside, away from oncoming traffic.
C_PL2000S_2000LS_GB.fm. 6-16 04-01.07
For relocation or during journeys required over a long-distance (distances > 1 km), the machine should be transported on its transporter for technical and safety reasons.
C6
