1
Starter
Brief description
Press to restart the engine. To prevent the batteries from discharging, do not press start button for more than 15 seconds
2
EMERGENCY STOP button
Press in an emergency (people in danger, threat of collision etc.)! - When the EMERGENCY STOP key is pressed, the engine, traction units and steering are all switched off (i.e. disabled). It will then be impossible to perform a procedure, such as one on the loading conveyor! Risk of accident! - To restart the engine, all EMERGENCY STOP buttons must be in the upright position.
3
Preselection controller Travel drive
This is used to set the speed which is to be attained when activating the direction of travel switch.
4
Switch Direction of travel
-
Top shift position: forwards direction of travel Bottom shift position: reverse direction of travel
-
Left shift position: front drive unit pair is steered to the left Right shift position: front drive unit pair is steered to the right Ensure that there is no-one in the machine’s danger area!
5
Front drive unit pair steering movement
-
-
6
Rear drive unit pair steering movement
7
D 130
The ignition on the main control panel must be switched on. (Ignition key in position 1)
Connection cable
Left shift position: rear drive unit pair is steered to the left Right shift position: rear drive unit pair is steered to the right Ensure that there is no-one in the machine’s danger area!
The connection cable with the four-pin connector is plugged into the socket provided for this purpose in the engine compartment behind the engine compartment flap.
D_PL2000S_2000LS_GB.fm. 130-146 04-01.07
Item Designation
