Additional test items for UVV inspection Where maintenance and UVV inspection work are combined, the following tasks must be performed in addition to the maintenance. 1. Chassis • Check for cracks on load-bearing components and weld seams. • Check decals are complete and legible (reverse steering, hooks, capacity chart, etc.). 2. Mast • Check load forks for cracks and deformation, (and welded seams if required). • Measure lift chain, elongation under maximum load using chain wear gauge no. 3 (1/2” -1 1/4”) 3. Brakes • Record brake retardation. • Visually inspect all brake components. • Measure brake lining and air gap. 4. Hydraulic system • Test pressure relief valves. • Determine the leak oil rate for lowering and tilt. 5. Special accessories • Ensure platform is operating safely.
92
