Parameter and options setting

Parameter and options setting

Travel parameter setting

Para meter Display Setting range Mode Meaning

PARAMETERS TRACTION CONTROL P00 OPERATION MODE

P06 CUTBACK REVERS.

1...5 Service Displays the operating program set The operator cannot make any adjustments 0...9 0 = slow 9 = fast Service Maximum speed setting in rear weight direction when the crawl speed switch is pressed. (Max. 2-10 km/h)

P08 CUT BACK FORW. 0...9 9 = fast Service Maximum speed setting in fork direction when the crawl speed switch is pressed. (Max. 2-10 km/h)

P09 ACCEL PEDAL ZERO TEACH IN 0...255 Service The left hand value gives the current value applied to the travel switch, the right hand value gives the travel switch value stored in the EPROM of the Canion at which point the controller starts to operate.

P10 ACCEL PEDAL MAX TEACH IN 0...255 Service The left hand value gives the current value applied to the travel switch, the right hand value gives the travel switch value stored in the EPROM of the Canion at which point the controller is 100% stabilised.

P12 HORN FUNCTION 0...3 Service For horn functions see table

P13 PARK BRAKE FKT 0...4 Service For handbrake functions see table

P14 OPTION 1 0..1 Service Service hour display selection Valid only for standard display 0 = duty cycle 1 = Effective hours display

Para meter Display Setting range Mode Meaning

P15 OPTION 2 0..9 Service Max. curve speed setting forward / see table P16 OPTION 3 0..9 Service Max. curve speed setting reverse / see table P20 BUZZER ON/OFF ON/OFF No function P23 BR. INHABIT TIME — No function P24 PEDAL MODE 0...2 Service Accelerator control characteristic 0=Aggressive 1=Normal 2=Soft. (see graphic) P25 TRUCK MODE 0...1 Service Twin pedal settings (0 = Solo / Masterpilot 1 = twin pedal) P26 CONTROL STOP — No function P32 SEAT SW. DELAY 0...9 Service After this period, the truck brakes electrically. (0,25s ... 4s)

Option 2/3 table (max. curve speed)

• These parameter settings affect the truck’s operational safety. Do not change the table values!

Truck type EP 40 EP 45 EP 50

Option 2 / 3 5 8 9

Horn function table

• This parameter is effective is the truck is abandoned without the handbrake applied.

Parameter Seat switch status Handbrake status Response

0 1 2 3 Any Void Void Void

Any No response Not applied Inf 90 / fl ashing warning symbol Not applied Inf 90 / fl ashing warning symbol, additional warning sound* Not applied Inf 90 / fl ashing warning symbol, additional warning sound for 5 seconds*

* Warning sound only for comfort display

Handbrake function table

• This parameter is effective for travelling against the handbrake..

Parameter Handbrake status Response (when accelerator pedal applied)

0 1 2 3 4

Any Travel release, no warning signal Connected Inf 90 / no travel release, fl ashing warning symbol Connected Inf 90 / no travel release, fl ashing warning symbol and warning sound* Connected Inf 90 / travel release for 3 seconds, fl ashing warning symbol Connected Inf 90 / travel release for 3 seconds, fl ashing warning symbol and warning sound*

* Warning sound only for comfort display