Additional test items for UVV inspection

Additional test items for UVV inspection

Where maintenance and UVV inspection work are combined, the following tasks must be performed in addition to the maintenance.

1. Chassis

• Check for cracks on load-bearing components and weld seams. • Check decals are complete and legible (reverse steering, hooks, capacity chart, etc.).

2. Mast

• Check load forks for cracks and deformation, (and welded seams if required). • Measure lift chain, elongation under maximum load using chain wear gauge no. 3 (1/2” -1 1/4”)

3. Brakes

• Record brake retardation. • Visually inspect all brake components. • Measure brake lining and air gap.

4. Hydraulic system

• Test pressure relief valves. • Determine the leak oil rate for lowering and tilt.

5. Special accessories

• Ensure platform is operating safely.