Steering angle sensor replacement / adjustment

Steering angle sensor replacement / adjustment

Preparation

• Park the truck securely • Fully lower the load lifting device • Set the main switch and key switch “OFF”

Disassembly

• Disconnect sensor cable connection. • Undo steering angle sensor mounting bolts (1)

Assembly

• Insert the steering angle sensor (2), set to 46 mm distance and tighten the mounting bolts (1). • Check the distance between the magnet and the sensor, approx. 3-4 mm, adjust if necessary. • Re-connect the sensor cable connection (interface)

fi g. 150a

EP 40-50

fi g. 150b

Steering angle Degrees 3,8 11,3 19,8 29,0 39,3 Potentiometer voltage V 4,500 4,875 5,250 5,625 6,000

Steering angle Degrees 50,6 62,6 74,3 80,9 Potentiometer voltage V 6,375 6,750 7,125 7,500