Special Function Menu

Special Function Menu

The special function menu is activated by pressing the ENTER and ESC keys simultaneously for at least 3 seconds.

The change is complete when the “i/o data display” changes. The special function menu offers the following items:

1. Input and output signals In this menu item you the status of the input and output signals can be seen.

Display text: “i/o data display”

2. Error log In this menu item the error log can be read and deleted. Display text: “error memory”

3. Parameters In this menu item parameters can be read and changed. A password must be entered to change parameters. Display text: “parameters”.

STOP Attention: The parameters are factory-set and must not be changed.

4. Calibration In this menu item sensors can be read and adjusted. A password must be entered. Display text: “alignment”

5. Version display In this menu item the versions of the various software modules can be displayed.

Display text: “version display”

6. Menu items are selected with the ENTER key. The ESC key forces the display to return to the basic setting.

Press simultaneously for 3 seconds

fi g. 100

Entering a Password

Only authorised persons may change settings. A password must therefore be entered toprogram parametersand to adjust the steering axles. When adjusting the steering axles the password has to be entered a single time after thesetting mode has been activated.

Use the +/- keys and ENTER to enter the password.

If an incorrect entry is made an error message is displayed that can be acknowledged with any key.