Force to zero When FORCE TO ZERO is activated (after the adjustable seat switch delay), for each “Seat switch not applied t applied” transition, the zero position of all hydraulic control levers (including lowering for the Multi Pilot) and the accelerator pedal are checked. If at least one control is not in the zero position, no PWM is generated and the error message 35/36 “no travel / lift zero position” is displayed. The default setting is “3”. Setting
1)
Setting 1)
Meaning
Meaning
0
Checks the zero position only when the truck is switched on. Lowering also possible when the seat switch is not pressed.
0
ZH1 (sideshift) is only permitted as the sole function. (Standard setting)
1
Checks the zero position each time the seat switch is pressed. Lowering also possible when the seat switch is not pressed.
1
ZH1 and tilting permissible at the same time.
2
Checks the zero position only when the truck is switched on. Lowering 1) only possible when the seat switch is pressed
2
ZH1, tilting and lifting permissible at the same time.
3
Checks the zero position each time the seat switch is pressed. Lowering 1) only possible when the seat switch is pressed
3
Hydraulic functions only permissible when ZH3 switch is pressed (+3 second delay) ZH1 is only permitted as the sole function.
4
Hydraulic functions only permissible when ZH3 switch is pressed (+3 second delay) ZH1 and tilting permissible at the same time.
5
Hydraulic functions only permissible when ZH3 switch is pressed (+3 second delay) ZH1, tilting and lifting permissible at the same time.
Multi Pilot trucks only
16
