Parameter and options setting Travel parameter setting
Parameter
Display
Setting range
Mode
Meaning
PARAMETERS TRACTION CONTROL P00
OPERATION MODE
1...5
Service
Displays the operating program set The operator cannot make any adjustments
P06
CUTBACK REVERS.
0...9 0 = slow 9 = fast
Service
Maximum speed setting in rear weight direction when the crawl speed switch is pressed. (Max. 2-10 km/h)
P08
CUT BACK FORW.
0...9 9 = fast
Service
Maximum speed setting in fork direction when the crawl speed switch is pressed. (Max. 2-10 km/h)
P09
ACCEL PEDAL ZERO TEACH IN
0...255
Service
The left hand value gives the current value applied to the travel switch, the right hand value gives the travel switch value stored in the EPROM of the Canion at which point the controller starts to operate.
P10
ACCEL PEDAL MAX TEACH IN
0...255
Service
The left hand value gives the current value applied to the travel switch, the right hand value gives the travel switch value stored in the EPROM of the Canion at which point the controller is 100% stabilised.
P12
HORN FUNCTION
0...3
Service
For horn functions see table
P13
PARK BRAKE FKT
0...4
Service
For handbrake functions see table
Service
Service hour display selection Valid only for standard display 0 = duty cycle 1 = Effective hours display
P14
OPTION 1
0..1
10
