BI001519
Replacement of wear parts _________________________________________ TAC monitor for conveyor speed sensor To replace the conveyor speed sensor TAC monitor: 1. Disconnect power from the machine following all applicable lockout/tagout regulations. 2. Open the control panel enclosure and locate the existing TAC monitor, mounted on the front side of the swing panel (Fig. 75). Fig. 75: TAC monitor location (typical) TAC monitor
3. Disconnect the existing monitor and remove. 4. Mount the new monitor on the swing panel. Connect the wires as shown in Table 4.
________________________________________________________________ Cat® FB110 Feeder Breaker 5.116
