INSTRUMENTS AND CONTROLS 91 Navigation of Co-Pilot® Menu ESC BUTTON The ESC (Escape) button on the stalk switch takes the Co-Pilot® back to the previous screen or level in the menu. Note: The ESC button does not function at Start Up or when the vehicle is moving. The ESC button is used only when the vehicle is stationary. ↵ ) BUTTON ENTER (↵ The Enter (↵ ) button on the stalk switch selects the highlighted menu items during menu selection. During Start Up and when moving the vehicle, the Enter(↵ ) button is also used to confirm or acknowledge a pop-up screen. Sometimes, the Enter(↵ ) button takes the Co-Pilot® back to the previous screen. UP & DOWN BUTTONS The Up & Down buttons at the end of the stalk switch allow the user to highlight the various available menu items. Sometimes, these buttons are used to enter information into the displays. • Up Button — Once at the top of the menu items that can be selected, pressing the Up button will take the display to the last item in the menu. For more information on Co-Pilot® display, please refer to the V-MAC® IV Operator’s Guide, TS898.