REPAIR INSTRUCTIONS 30. For the conventional output shaft transmissions: T313–T318(L)(LR), install the shaft snap ring into the front groove of the rear mainshaft, against the inner race of the ball bearing.
389
387
Figure 387 — Installing Shaft Snap Ring (T313L/T318L Shown)
31. On the conventional output shaft transmissions: T313–T318(L)(LR), install the remaining gear snap ring into the second (forward) groove from the front of the gear. 388
Figure 389 — Installing Internal-Toothed Thrust Washer (T313L21/T318L21 Shown)
33. For the extended output shaft transmissions: T313–T318(21)(L21)(LR21), install the external-toothed thrust washer onto the front of the output shaft. Note that the oil grooves of the external-toothed thrust washer face rearward toward the internal-toothed thrust washer. 390
Figure 388 — Installing Gear Snap Ring (T313L/T318L Shown)
32. On the extended output shaft transmissions: T313–T318(21)(L21)(LR21), install the snap ring onto the output shaft. Then, install the internal-toothed thrust washer over the output shaft and against the snap ring.
Figure 390 — Installing External-Toothed Thrust Washer (T313L21/T318L21 Shown)
Page 157
