REPAIR INSTRUCTIONS

5.Remove the internal- and external-toothed thrust washers from inside the Lo-speed gear.

7.Using suitable snap ring pliers, remove the snap ring from the outside groove, inside the Lo-speed gear.

8.Remove the first (fifth) speed gear from the mainshaft. Slide the gear straight off the rear end of the shaft.

9.Remove the first (fifth) speed gear snap ring, using suitable snap ring pliers.

11.Working at the opposite end of the mainshaft and using suitable snap ring pliers, remove the snap ring that retains the fourth (eighth) speed gear to the mainshaft (first snap ring groove from the front of the mainshaft).

10.Remove the first (fifth) speed gear internaland external-toothed thrust washers. Then remove the first (fifth) speed gear mainshaft snap ring, using suitable snap ring pliers (seventh snap ring groove from the rear of the mainshaft).

12.Remove the internal- and external-toothed thrust washers at the fourth (eighth) speed gear and remove them from the