REPAIR INSTRUCTIONS

37.Mark the rear countershafts so they can be installed in the same position during reassembly.

39.Remove all of the remaining capscrews and dowel bolts that hold the rear case to the main case. Tap dowel bolts out of the rear case using a brass hammer or a combination of a brass hammer and a steel hammer as long as contact is made with the brass hammer only.

38.Place the transmission in a vertical position (rear case upward), and remove the two capscrews located inside the rear case.

When separating the rear case from the front case, make sure the transmission is in the vertical position. The rear countershafts are not supported when the case is removed. They can fall out and cause damage or personal injury.