REPAIR INSTRUCTIONS

75.Remove the No. 3 (lower) countershaft by pulling and tilting the front end of the shaft upward.

71.Remove the No. 3 (lower) front countershaft rear bearing cover capscrews.

72.Remove the No. 3 (lower) front countershaft rear bearing cover, using jackscrews. Remove shims with cover.

73.Using tool J 34630 or a slide hammer, remove the lower reverse idler shaft (next to No. 3 countershaft). To prevent damage to the reverse idler gear, catch the gear as it separates from the shaft.

74.Remove the No. 1 (upper left) front countershaft by pulling and tilting the front end of the shaft upward.

76.Remove the remaining No. 1 (upper right, viewed from front) and No. 3 (lower) front countershaft front bearing cover capscrews and bearing covers. Use jackscrews to remove the covers.