REPAIR INSTRUCTIONS

85.Install the rear case shift cover, lift bracket and cover capscrews. Make sure to align the shift fork with the sliding clutch. Tighten the capscrews to the specified torque.

The lift bracket capscrews are slightly longer than the remainder of the shift cover capscrews. Make sure the longer capscrews are used to secure the lift bracket. The lift bracket is placed at the right rear corner of the shift cover.

90.Install the main case shift cover and lift bracket capscrews and tighten to the specified torque. Install the lifting bracket and longer capscrews at the left front corner of the main case shift cover as shown.

86.Clean the gasket or sealant surface of the main case shift cover.

87.Install a new main case shift cover gasket. Use a small amount of adhesive or grease to hold it in place.

88.Make sure the shift forks on the cover and the sliding clutches on the mainshaft are in the neutral position for proper alignment.

89.Align the shift forks with the sliding clutches and install the main case shift cover.

The lift bracket capscrews are slightly longer than the remainder of the shift cover capscrews. Make sure the longer capscrews are used to secure the lift bracket.