REPAIR INSTRUCTIONS

5.Press the main drive pinion shaft and bearing assembly into the main drive pinion bearing cover.

One side of the large snap ring is bevelled and faces out. The flat side of the snap ring goes against the bearing.

6.Install the main drive pinion bearing snap ring, using suitable snap ring pliers.

The large snap ring is very difficult to compress and may fly off the snap ring pliers, causing injury.

7.Install a new spigot bearing into the end of the main drive pinion shaft by hand. Then, install the retaining snap ring.

Drawn cup needle bearings (spigot bearings) have a specific direction in which they must be installed. The radius end of the bearing must be installed first. The flat end of the bearing faces out.