REPAIR INSTRUCTIONS

3.Remove the spacer located between the Lo-split gear and the Hi-range/Hi-split gear.

4.Press the Hi-range/Hi-split gear from the countershaft. Note that the hub of the gear faces forward.

5.Remove the key from the keyway of the rear

The following procedure applies to all three rear countershaft bearing covers.

1.Remove the shim(s) and O-ring from the shoulder of the countershaft rear bearing cover. Tag the shim(s) and record the markings for use during assembly.

2.Remove the bearing cup from the bearing cover, using puller J 21834-4A or suitable puller.

3.Thoroughly clean the bearing cover and inspect for damage.

The following procedure applies to all three reverse

1.Press the bearing out of the reverse idler gear, using a suitable driver.

2.Thoroughly