Control, operation
Operating instructions
Working with the machine
direction. lengthwise direction, to avoid impermissible transverse slopes of the machine. ly! In material handling operation: ge from transport position, the machine must be supported and horizontally aligned. e of the outriggers (load carrying capacity of ground). Sinking of an outrigger below ground level would result in devastating consequences! s with increased caution. (Caution! Oscillating grapple), while holding the load as close as possible to the undercarriage and above the ground.
3.4.1.3
Additional notes for machin vation lengthwise and horizontal direction. Position the uppercarriage to the undercarriage in such a way that the steps and ladders are aligned. ) in proper condition. Make especially sure that they are free of dirt, oil, ice and snow. NOTE: To ensure that the doors open in all weather conditions, lubricate the weather strips at least every two month, or more often, if necessary, with talcum powder or silicon. Lubricate the door hinges and locks regularly. three point support, i.e. always have two hands and one foot or two feet and one hand in contact with the entry system. climbing higher. External influences, such as wind, can make it more difficult to open the door. For that reason, always guide the door by hand when opening the door. Make sure that the door is engaged when it is open, to prevent it from banging open or closed. close the door and fasten the safety belt. and climbing up the machine. undercarriage in such a way that the steps and ladders are aligned. support. Climb down until you can close the door safely. Always guide the door by hand when closing the door.
3.4.1.4
Protection from vibrations manner of utilization. Especially the following parameters have a significant influence: braking, control of operating elements of the machine during travel as well as working.
3 - 48
MJFCIFSS
A 316 Litronic / 8720369
