Control, operation

S61 - Headlight

This switch has three settings: Neutral (0), Position 1 and 2. Push the switch in position 1 down (center position). The parking light is activated. Push the switch in position 2 down (final position). The headlight is activated.

The switch is also functioning if the ignition key is in position 0 or P.

Press switch.

The corresponding outrigger is activated. The indicator light in the switch lights up. Press switch again.

The corresponding outrigger is deactivated. The indicator light in the switch turns off.

S218 - Windshield wiper on cab roof (green)

This switch has three settings: Neutral (0), Position 1 and 2. Push the switch in position 1 down (center position). Continuous operation is activated.

Push the switch down to position 2 and hold (final position). Water will be sprayed on the windshield. The windshield wiper runs continuously.

S241 - Auxiliary user (green)*

This switch has three settings: Neutral (0), Position 1 and 2. Push the switch in position 1 down (center position). The auxiliary user with high pressure (e.g. sorting grapple, scrap cutter) is activated.

The indicator light H196 lights up.

Push the switch in position 2 down (final position). The auxiliary user with reduced pressure (e.g. hydraulic hammer, ram) is activated.

The indicator light H196 turns off. The indicator light in the switch lights up.

S318 - Air conditioning system (green)*

Press switch down.

The air conditioning system is turned on. The indicator light in the switch lights up. Press switch up.

The air conditioning system is turned off. The indicator light in the switch turns off.

S335 - Blade support (green)

Press switch.

The dozer blade is activated. The indicator light in the switch lights up.

S360 - Acknowledge buzzer quick coupler (green)*

The button is available if the machine is equipped with an overload warning device. Press switch down.

The buzzer for the quick change adapter is deactivated.

S398 - Reversing switch (green)

Press switch down.

The air flow will be changed from outlet nozzles 8c (head area) to outlet nozzles 8a (foot area) and 8b (front window).

The indicator light in the switch lights up.

Press switch up.

The air flow will be changed from outlet nozzles 8a (foot area) and 8b (front window) to outlet nozzles 8c (head area).

The indicator light in the switch turns off.

S422 - Radio mute

Press switch down.

The radio is muted

The indicator light in the switch lights up.

Press switch up.

Radio plays again at original volume. The indicator light in the switch turns off.

3.2Operation

3.2.1Entering or leavi

3.2.1.1Entering

Caution!

Ensure that the safety lever is always in its uppermost position when entering or leaving the cab.

Always use the handholds provided for this purpose when entering or leaving the machine.

Do not use the control levers as handholds. Never jump off the machine.

3.2.1.3Getting out

Shut down the machine and raise the safety lever. Push the door handle 3 on the lock down. Open the door fully and secure it in latch 2. Climb out facing the machine.

To release the door latch: The door is secured in latch 2. Move the lever 4 next to the cab frame outward. The door is now unlocked. Close the door.

3.2.2Safety lever

For safety purposes, the left-hand control desk is provided with a safety lever.