1 minute read
Control, operation
3.3.1.2Starting the machine safely
and instruments for proper function, bring all controls into neutral position and raise the safety lever. located near the machine.
regulations in the operating instructions, if you have not received any other instructions. trols for their proper indication. Open doors and windows to ensure sufficient fresh air supply, if necessary. cause aslow reaction of the controls.
3.3.1.3Shutting down the machine safely
cured with chocks, wenn setting it on aslope, to secrure it against rolling away. gear brake.
the operating instructions and move the secure the machine against any unauthorized use.
3.3.1.4Towing safely operating manual. move the machine away from a dangerous place. towing the machine, check all cables, hooks and couplers for safety and stability.
The Machine
ile strength and must be attached to the undercarriage at the provided stops. Be aware that any damage or accidents caused by towing the machine are never covered by the manufacturer's warranty.
the required transport position, the permissible speed and distance. service.
3.3.2Starting / shutting down the machine
3.3.2.1Activities before starting
Caution!
It is only possible to extinguish the source of fire if it is accessible. Before starting, unlock all locks on the covers of the hydraulic excavator. In the event of a fire, the doors can be opened immediately and the fire can be extinguished.
Location of locks: see Maintenance chapter ing and combustion air intake.
Caution!
With the activities referred to below and a machine that is already at operating temperature, there is a risk of scalding or burning from hot coolant or hot oil. Make sure to first read the information provided in the Maintenance chapter before carrying out these activities.
Before starting the machine, the following tasks should be carried out on a daily basis: the hydraulic tank*.
* To complete these tasks, refer to the Maintenance chapter.
3.3.2.2Starting the Diesel engine
Switch positions of ignition key
