1 minute read
Control, operation
Working with the machine
3.4.7Joystick functions
Caution!
The machine is delivered in series with PCSA controls On request, the machine can be equipped with a control system that deviates from the PCSA controls (e.g. LIEBHERR control). In this case, the additional operating instructions for this control system must be observed.
The joystick functions described here refer exclusively to PCSA controls
3.4.7.1Operating the stick cylinder
The stick cylinder is operated using the left joystick 4.
Pull the joystick back a. The stick will be retracted.
Push the joystick forwards b The stick will be extended.
3.4.7.2Operating the boom cylinder
The boom cylinder is operated using the right joystick 3
Pull the joystick back g The attachment will be raised.
Push the joystick forward h The attachment will be lowered.
3.4.7.3Operating the bucket cylinder
The bucket cylinder is operated using the right joystick 3.
Move the joystick to the left e The bucket will be curled in.
Push the joystick to the right f The bucket will be curled out.
3.4.7.4Operating the grapple cylinder
The grapple cylinder is operated using the right joystick 3.
Danger!
Never allow anyone to guide the grapple by hand!
Move the joystick to the left e The grapple will close.
Push the joystick to the right f The grapple will open.
3.4.7.5Combined movements
Moving a joystick diagonally allows a combination of the corresponding work functions. Thus different attachment movements can be actuated at the same time.
