Safety information, signs

Use in accordance with the regulations

Operating instructions

This symbol identifies an action.

The machine operator or the maintenance personnel should be active at this location and carry out the action described.

This symbol means "Carry out an activity".

If the machine operator or maintenance personnel have carried out the activities described in an action, the result of this action will be described here.

Following these notes does not relieve you of the responsibility for following additional rules and guidelines!

Additional points that should be observed are:

2.2Use in accordance with the regulations

ple, bucket ) designed to loosen, take on, transport and dump soil, rocks and other materials, where the load is predominantly transported without moving the machine. Moving the machine when it is carrying a load must be carried out by observing the appropriate safety measures (see section "Notes for machine operating safety").

quires special equipment and may also require special safety devices. These attachments (e.g. log grapple, demolition hammer, concrete cutter etc.) may only be attached and used with approval and in accordance with the basic machine manufacturer.

intended use. The manufacturer is not liable for damage resulting from this action. The risk must be assumed solely by the user.

and the inspection / maintenance instructions is also deemed to be appropriate and destined use in accordance with regulations.

2.3Safety instructions

2.3.1General Safety instructions

ating instructions before starting the machine.

instructions and have read and understood these (this may concern special options for the machine). perate, maintain or repair the machine. The legal minimum age must be observed.

Clearly define who is responsible for the operation or set up, maintenance and repair. Allow personnel to refuse unsafe instructions given by a third person. This also applies to traffic regulations. Reject unsafe instructions by third parties and/or allow your personnel to reject these. This also applies in regards to traffic regulations.

should only operate or work on the machine under the constant supervision and guidance of an experienced person.

ically if they observe safety instructions and guidelines given in the Operating manual.

wearing rings, watches, ties, scarves, open jackets or loose clothing. There is a danger of injury, as these items could get caught or be pulled in.The following are mandatory for certain tasks: Safety glasses, safety shoes, safety helmet, work gloves, reflecting vest, hearing protection, ...

s, safety boots, work gloves, reflective vests, ear protection etc. are required.

r special safety instructions and regulations.

el or the joysticks as handholds. Inadvertent movements, which could cause accidents, should be touched off.

vided to climb off or on the machine.

h the emergency exit through the front window. ructions, if no other instructions are available for maintenance and repairs: to the ground. he hydraulic system and the interior pressure of the tank prior to any operation on the hydraulic system as described in these operating instructions. ng a thorough inspection and check, if safety tags are missing or are illegible. chments or retrofits on the machine, which could inhibit safety, without the prior consent of the manufacturer. This also applies to the installation and adjustment of safety devices and safety valves as well as to any welding on load carrying parts.

2.3.2Crushing and burn prevention

long as it is not safely resting on the ground or properly supported.

supporting load carrying devices, such as ropes or chains.