Control, operation
Operating instructions
Working with the machine
cured. lations and, if necessary, first bring the machine into proper condition to meet federal and local highway standards. s of poor visibility or darkness.
are carried out immediately.
ing manual. long as the machine is still moving. d operated in such way that the stability is ensured and that there is no danger of tipping over. Only known loads may be moved with the attachments, especially in grapple operation. pends on the attached equipment as well as the substrate. close as possible to the ground. EXCEPTION: see WHEN LOADING AND UNLOADING
uphill, never sideways on a slope. e permitted speed or you could loose control over the machine. d, since you may otherwise loose control of the machine. The Diesel engine must run in the upper revolution range and be reduced by selecting the low driving speed range / the lowest gear. to a lower gear. When doing this, the Diesel engine must run at maximum RPM and the speed may only be reduced using the accelerator pedals. rock protection is present. clearings, hoisting operations, etc. overview of and whenever necessary, ask for assistance of a guide. Have only one person signal you. ator. The guide must position himself within view of the operator or be in voice contact with him. nt combination, there can be a danger of collision becab, the cab protection or the boom cylinders. To avoid damage, utmost attention is required when the bucket teeth enter this range.
3 - 46
MJFCIFSS
A 316 Litronic / 8720369
