Control, operation
Operating instructions
Operation
To bring the support into a road travel position:
Fig. 3-39
Outrigger support for road travel
Retract the outrigger support to the stop. Fold the hinged support feet of the outriggers inward.
Fig. 3-40
Blade support for road travel
If installed, fold the step 1 up and secure. Push the blade support up to the stop. Attach additional rear reflectors 2 on the left and right hand side on the blade and secure. Before starting to travel: To turn off the control for the working hydraulics: Push switch S35 up. The indicator light in the switch turns off. The joysticks do not function. The sensor controlled low idle automatic is deactivated. Switch the automatic oscillating axle lock S75 to position 0.
3.3.6
Towing the machine Danger! Risk of injury! Use a suitably sized towbar to tow the machine. Do not use a rope. Towing the machine is problematic and is always carried out at the owner's risk.
3 - 40
MJFCIFSS
A 316 Litronic / 8720369
