10.8 COOLING SYSTEM - REMOVAL AND INSTALLATION 10.8.1 PREPARATION AND SAFETY INSTRUCTIONS • • •
Stabilise the machine on level ground, fully retract the boom, place transmission control lever in neutral position. Ensure the engine is Shut OFF. Disconnect the battery.
! NOTE Hot oils and fluids must be left to cool down before carrying out the uninstallation procedure. ! CAUTION Before considering radiator or oil cooler replacement for other than obvious damage, conduct a cooling system pressure test check the coolant specific gravity, coolant level, fan belt tension and dash panel temperature indicator. • •
Unscrew the Bolts - Washers (1) and remove the license plate (2). Unscrew the Bolts - Washers (3) and uninstall the Grill (4). 4
3 2
1
•
Uninstall the Hex Socket Head Screw - Washers (5) and remove the Towing Hook (6).
5 7
•
6
Uninstall the Counterweight (7).
7
15
