F-code
Section
PS
S6.1 6112 Hydraulic Fluid
Version no
000
C-code
T-code
395/396/397/398/399
4. Refilling System 1. If reservoir was removed for flushing, install reservoir. 2. Install hydraulic filter. 3. Fill hydraulic reservoir through bleeder cap/fill hole. Be sure to use proper grade of fluid. The reservoir holds 5 gallons (19 liters) of fluid. 4. Connect battery connector to the truck and turn key switch ON. 5. Bleed hydraulic system (see page 450). 6. Install dash and secure motor compartment door.
© BT Prime-Mover, Inc.
Return
Master Service Manual
2000-08-04
449
