1 minute read
Travel Alarm (Option
from BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000
F-code Section C-code PS 5.6 5121 Light Assemblies
Version no T-code 000 395/396/397/398/399
4. Travel Alarm (Option)
The travel alarm option is installed on the bottom of the overhead guard. The alarm is on when the truck is moving.
4.1. Removal
1.Turn the key switch OFF and disconnect battery connector from the truck. 2.Disconnect electrical connection at travel/back-up alarm. 3.Remove two hex head screws (6) securing travel/ back-up alarm (5) to the overhead guard bracket (4). 4.Replace alarm assembly as required.
4.2. Installation
1.Secure travel/back-up alarm assembly to overhead guard bracket (4) with two hex head screws (6). 2.Reconnect wiring harness. 3.Connect battery connector to the truck. 4.Test operation of alarm, then return truck to service.
