1 minute read
Refilling System
from BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000
F-code Section C-code PS S6.1 6112 Hydraulic Fluid
Version no T-code 000 395/396/397/398/399
4. Refilling System
1.If reservoir was removed for flushing, install reservoir. 2.Install hydraulic filter. 3.Fill hydraulic reservoir through bleeder cap/fill hole.
Be sure to use proper grade of fluid. The reservoir holds 5 gallons (19 liters) of fluid. 4.Connect battery connector to the truck and turn key switch ON. 5.Bleed hydraulic system (see page450). 6.Install dash and secure motor compartment door.
