1 minute read
Removal
from BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000
F-code Section C-code PS S6.1 6112 Hydraulic Tank
Version no T-code 000 395/396/397/398/399
1. Removal
1.Lower carriage fully and retract reach mechanism fully. 2.Remove dash (see page100). 3.Drain hydraulic system (see page448). 4.Remove left side panel (see page102). 5.Turn the key switch OFF and disconnect battery connector from the truck. 6.Remove drive motor and brake assembly. 7.Remove pump and motor. 8.Disconnect hydraulic hose to mast. Plug ends to prevent contamination. 9.Disconnect hydraulic hose to control valve. Plug end to prevent contamination. 10.To remove reservoir, tilt truck end of reservoir up.
Pull reservoir back, away from mast. Once the front of reservoir has cleared front truck frame, lift the reservoir out. 11.Remove hydraulic filter adapter.
