1 minute read
Installation
from BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000
F-code Section C-code PS S3.6 3550 Load Wheels, Sizes 4 X 3, 5 X 4, and 5 X 3
Version no T-code 000 398/399
2. Installation
1.Pack bearings with grease. 2.Install bearings in the load wheel. 3.Install load wheel assembly in toe box (2).
NOTE! Place a block behind the axle to hold it in place while assembling the rocker plate and snap rings. 4.Install axle (1), washers (6 and 7) and rocker plate (3). 5.Install retainer rings (4) to axle (1). 6.Remove the blocking. Lower truck to the floor. 7.Connect battery connector to the truck. 8.Test operate truck. 9.Return truck to service.
