Wheel Bolt

from BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000

Hydraulic Filter

F-code Section C-code PS S2.0 2550 Transmission

Version no T-code 000 395/396/397/398/399

7. Wheel Bolt

1.Drain transmission oil by removing drain plug (28). 2.Remove transmission from truck. 3.Remove drive axle from the transmission case. 4.Press or drive out the damaged bolt from the drive axle rim.

NOTE! Always install a new drive axle seal during assembly. 5.Smooth away any burring around the bolt hole.

Press or drive new bolt into place. 6.Install drive axle into the transmission case. 7.Install transmission on truck.

Next Article

Hydraulic Filter

7. Wheel Bolt

More articles from this publication:

Hydraulic Filter

Removal

Transistor Controller Replacement

Adjustment Procedures for Setting Brake Switch and Brake Transducer

Wheel Direction Sensor

Refilling System

Lift Limit Override Switch (S33) Optional

Travel Alarm (Option

Installation

This article is from:

BT Electric Electrical Stand-Up Rider Truck RRX35/45 RDX30 RSX40/50 Master Service Manual 306756-000