Working Lights (Option

Light

F-code Section C-code PS 5.6 5121 Light Assemblies

Version no T-code 000 395/396/397/398/399

2.2. Installation

1.Secure light assembly to overhead guard bracket (4) with two hex head screws (1). 2.Reconnect wiring harness. 3.Connect battery connector to the truck. 4.Test operation of warning lights, then return truck to service.

3. Working Lights (Option)

The working lights option consists of two flood lights mounted on the underside of the overhead guard.

3.1. Removal

1.Turn the key switch OFF and disconnect battery connector from the truck. 2.Disconnect electrical connection at working light. 3.Remove screws securing light assembly to overhead guard. 4.Replace light bulb or light assembly as required.

3.2. Installation

1.Secure light assembly to overhead guard. 2.Reconnect wiring harness. 3.Connect battery connector to the truck. 4.Test operation of working lights, then return truck to service.