Maintenance and servicing work
Check valve clearance (engine management). Set if necessary
•
Check battery charge condition. Charge if necessary8
•
Clean the fine-dust filter of the heating system (replace every 500 s/h)
•
Check and set service and parking brake pads9. Replace if necessary
•
Tyre check (damage, air pressure, tread depth)
●
9
•
Check condition of trailer couplings (option). Replace if necessary
•
Aggressive media (option): check anticorrosion protection, renew if necessary 10
●
●
●
●
●
●
●
●
●
●
●
● ●
●
“C” every 1500 s/h once a year
•
●
“B” 2nd Inspection1 every 500 s/h
Drain the water in the fuel/water separator
●
Workshop “A” 1st Inspection1 at 100 s/h
•
●
Every 20 s/h
Check condition and pre-tension of V-belts. Retighten or replace if necessary
Maintenance work (once a day)
•
Operator/driver
Delivery inspection
Work description
Workshop
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Check screws and nuts or screw connections for tightness on the following assemblies/components. Retighten if necessary •
Engine and engine bearing
●
●
●
•
Steering system9
●
●
●
•
Hydraulic system
●
●
●
•
Loader unit (pin locking)
●
●
●
•
Axle mounting, axle suspension
●
●
●
•
Counterweight (attachment)
●
●
●
•
Fastening screws of cardan shafts
●
●
●
•
Fastening screws of cab
●
●
●
•
Wheel nuts
●
●
●
●
•
Fastening screws of trailer coupling (option)
●
●
●
●
•
Electrical system: check electric and earth connections, chafing on wiring harness, battery terminals
●
●
●
●
3-6
Serv-HB 34900/01 – Edition 1.0 * 34901_0340_Wartungsplan.fm
