Hydraulic oil filter indicator light (red

3.4 Maintenance plan

Important notice on the maintenance plan

Maintenance plan overview

For service and maintenance work on the attachment, please refer to the Operator’s and maintenance manual of the attachment manufacturer as well. Have maintenance work, the Delivery Inspection, the 1st Inspection at 100s/h and the 2nd Inspection every 500 and 1500 s/h (once a year) carried out by an authorised workshop, otherwise warranty claims will not be acknowledged.

Work description

Oil and filter changes, fan bearing ( )

• Change the engine oil • Replace the engine oil filter • Replace fuel filter, fuel prefilter • Replace the2 air filter insert • Replace the safety cartridge of the air filter insert3

• Gearbox oil in rear axle gearbox • Gearbox oil in differential (front and rear axles) • Gearbox oil in left and right-hand planetary drives (front and rear axles) • Replace the hydraulic oil4

• Replace the hydraulic oil filter insert • Replace the hydraulic oil tank breather filter 3 • Replace the fine-dust filter of the heating5

Inspection work ( ):

• Check engine oil level • Check hydraulic oil level • Check coolant level6

Workshop Operator/driver

inspection Delivery (once a day) Maintenance work Every 20s/h Workshop

at 100s/h 1st Inspection

1 “A” every 500s/h 2nd Inspection

1

“B” once a year every 1500s/h “C”

● ● ● ● ● ● ● ● ● ● ● ● • Check gearbox oil level in front and rear axle differential ● ● ● ●

• Check gearbox oil level in gearbox • Check gearbox oil level in front and rear axle, left and right planetary drives • Check brake fluid (LHM) level6 • Check water/oil cooler for dirt and clean if necessary7 • When using biodegradable oil: drain the condensation water in the hydraulic oil tank 4 • Clean dust valve on air filter housing 2