Diesel engine coolant temperature indicator light (red

Work description

• Check condition and pre-tension of V-belts. Retighten or replace if necessary • Drain the water in the fuel/water separator

Workshop Operator/driver

inspection Delivery (once a day) Maintenance work Every 20s/h Workshop

at 100s/h 1st Inspection

1 “A” every 500s/h 2nd Inspection

1

“B” once a year every 1500s/h

• Check valve clearance (engine management). Set if necessary • Check battery charge condition. Charge if necessary8 • Clean the fine-dust filter of the heating system (replace every 500s/h) • Check and set service and parking brake pads9. Replace if necessary • Tyre check (damage, air pressure, tread depth) • Check condition of trailer couplings 9 (option). Replace if necessary • Aggressive media (option): check anticorrosion protection, renew if necessary10 Check screws and nuts or screw connections for tightness on the following assemblies/components. Retighten if necessary • Engine and engine bearing ● ● ● • Steering system9 ● ● ●

• Hydraulic system • Loader unit (pin locking) • Axle mounting, axle suspension • Counterweight (attachment) • Fastening screws of cardan shafts • Fastening screws of cab • Wheel nuts ● ● ● ●

“C”

• Fastening screws of trailer coupling (option) • Electrical system: check electric and earth connections, chafing on wiring harness, battery terminals