Instrument Cluster Air Filter Clogging Indicator This is an Amber LED and glows when Air filter is clogged. This gives an indication to the customer that the air filter needs to be cleaned for proper functioning and beeper also give an audio warning. Refer Beeper Output Provision in subsequent pages of this manual for Beep rate.
F-R Shuttle Switch Neutral Indicator This is a Green LED and glows when F-R shuttle switch is in neutral position.
Air Pre-Heat Indicator When the key is turned to ignition position, the cold start aid Indicator glows to indicate the activation of heater element provided in engine. Activation of this LED depends on Ambient temperature. 1. Turn the key to "ON" position and wait till the heater indicator is off. 2. Crank the engine when the heater indicator light is off.
NOTE :Engine runs at higher than idle rpm (about 1400 rpm) and drops gradually to the normal idling speed (850 rpm) until coolant temperature reaches to 770F (250C).
Fuel Level Gauge The Fuel Gauge is displayed on the left side of rpm meter when viewed from the driver’s seat. It indicates quantity of fuel available in the fuel tank. The indication is divided into 9 stages. The Red zone indicates that the fuel level is less and the tractor should be refueled for uninterrupted run. Low fuel indication & buzzer ON at 2nd Graduation & OFF at 3rd Graduation. Buzzer sound at the rate of 15 beeps per min.
Clutch Over Ride Indicator Optional feature: This is an Amber LED and glows when clutch pedal is pressed for more than 10 sec. This symbol will glow if the feature is equipped.
High Beam Indicator This is a Blue LED and glows when Head Lamps are operated in High Beam.
36
8000 Series, Models - 8090/8100 4WD CAB TIER-4 Final
