Lubrication Oil

Engine oil

Refer Table A for oil specifications.

Recommended Oils

1.Mahindra Part No.MCJ15W40

2.Mahindra Part No. MFSHD5W30

3.Mahindra M-Star Ultra

Transmission, Hydraulics and Oil Immersed Brakes

Use specific Tractor Transmission Fluids which are recommended for oil immersed brake application. Following oils are recommended for optimal performance

1.Warren THF Purple

2.m-UTTO 2

Check with Mahindra service engineer for suitability of any other oils before using.

For implements / loader attachments, use only the recommended oils. Do not mix different brand of oils as it may cause performance deterioration especially at lower ambient temperature.

Factory filled oil is m-UTTO 2

Chassis Lubricant (CL)

Lithium or Lithium complex type grease with Extreme Pressure (EP) additive is recommended. Depending on the expected ambient temperature range during the operation, use grease as mentioned below.

For Temperature up to 5°FMineral grease NLGI 2 grade

For Temperature below 5°FSynthetic grease NLGI 2 grade

Front Axle

Use gear oil complying to API GL5, MIL-L-2105D specifications. Please refer oil specification chart for oil viscosity grade at different range of ambient temperature.

If the engine / tractor is not operated for longer time, there are possibilities oil deterioration can occur. Hence, it is recommended to change the engine oil after every year if the tractor / engine is idle or operated less frequently. Further, in long idle condition lack of lubrication can occur. Hence, it is suggested to check oil level before start, top-up 200 to 300 ml of oil, run the engine at low rpm for 5 min. and then start normal operation. This will allow the oil to lubricate all the engine parts optimally.

Oil Specifications Chart (Table A)

1.Crankcase3.57

2.Transmission

3.Lubrication FittingsAs requiredMineral grease NLGI 2 gradeSynthetic grease NLGI 2 grade

4.Front Axle1.79 / 7.16GL-5, SAE