Lubrication System Changing Oil Filter 1. Ensure that engine is stopped before changing filter. 2. Remove the lub oil filter Guard. 3. Unscrew the oil filter. 4. Prime the new oil filter with clean oil.
Do not drain the oil when the engine is hot. Wait for the engine to cool.
5. Screw the new filter to the adapter. 6. Move the Hand and foot throttle to engine “Idle” position. 7. Start the engine, check the oil pressure gauge to see whether the lubricating oil is circulating through the Engine.
Stop the engine immediately if Oil pressure is not recorded within 10 seconds of engine starting or Leakage is observed. Get the cause identified and rectified before proceeding further.
8. Inspect the oil filter for oil leaks.
NOTE: Engine oil and filter element must be changed after initial 50 hrs. of operation in new tractor or whenever major overhaul of engine is carried out and subsequently after every 500 hrs. or 1 year, whichever is earlier. To avoid delays, we recommend that you carry extra filter elements on hand so that replacements can be made at the correct time. The FILTER is located on the right-hand side of the crankcase. Filling oil consumes time. Allow sufficient time for the oil to settle down in crankcase. Dispose the used oil properly.
Turbocharger Check the turbocharger periodically as follows. 1. Move the hand and foot throttle to engine "Idle" position. 2. Inspect the oil filter for oil leaks through oil supply and drain line. 3. Stop the engine immediately if leakage or abnormal sound is observed. Get the cause identified and rectified before proceeding further.
102
8000 Series, Models - 8090/8100 4WD CAB TIER-4 Final
