BF15D-BF20D 12)Check the tilt lever bushing A for wear or damage, replace with new one if necessary. 13)Apply grease to the tilt lever bushing B. 14)lnstall the tilt arm, tilt shaft and tilt shaft bracket.
k
TILT 11I SHAFT
141 TILT SHAFT BRACKET
YliT LEVER BUSHING B (2)
15)Turn the tilt shaft until the locking tab faces toward up, and align the pin holes of the tilt shaft bracket with pin hole of tilt shaft and set a new 3 x 25 mm spring pin.
[ l ] 3 mm PIN DRIVER (commercially
16)Drive the spring pins using a commercially available pin driver until the both projected distances are equally as shown.
PI
TILT SHAFT BRACKET
1
[31
3 x 25 mm SPRING PIN
12-17
