BI001467
Electrical system _________________________________________________ Starter enclosure The starter enclosure, located on the left side of the machine, houses the primary electrical control components. WARNING! Before removing the cover from the starter enclosure and attempting any maintenance or troubleshooting on the machine, the main power must be disconnected and locked and tagged out at the main power center. There are operational controls located on the front of the starter enclosure (Fig. 26). For control descriptions, see the Controls and Indicators section in this chapter. Fig. 26: Starter enclosure 1
2
5
1. 2. 3. 4. 5. 6.
3
6
4
7
8
9
10
“MAN/OFF/AUTO” “TRAM/OFF/CONV” “FWD CONV/OFF/REV CONV” PLC display “15A CB RESET” “PICK BRK STOP”
11
7. 8. 9. 10. 11.
“E-STOP” “ACKNOWLEDGE ALARMS” “CONV START” “START BREAKER” Circuit breaker reset lever
________________________________________________________________ FB140 (7MFBHM-48DD) Feeder Breaker 5.34
