5-2 Lower Mechanism: Travel Drive Unit 12-4.) Secure the cylinder block (1-4-1) in place on the manual press deck with the sliding surface up. Press the collar (1-4-8) with the snap ring (1-4-5) removal jig to make the spring (1-4-7) deflect and remove the snap ring (1-4-5) using a snap ring pliers. Note: When removing the snap ring (1-4-5), follow the instructions below in order to avoid injuries. a.When removing the snap ring (1-4-5) with snap ring pliers, the snap ring may drop out of the snap ring pliers due to its hardness, leading to injury. When removing the snap ring, always use the disassembling jig and check that the claws of the snap ring pliers are engaged in the snap ring hole before proceeding with the work.
12-5.) Remove the collar (1-4-8), spring (1-4-7) and collar (1-4-6) from the cylinder block (1-4-1).
13.) Removing the swash plate (1-5) Remove the swash plate (1-5) from the flange (1-1). Note: When removing the swash plate (1-5), follow the instructions below. a.Take care not to damage the sliding surface of the swash plate (1-5). Damaging it would fail the design performance. b.The swash plate (1-5) may come out with the piston assembly (1-7) and steel ball (1-6). In that case, take precautions to prevent the steel ball (1-6) from falling.
89
